Halfpipe HP 24

Tandem Halfpipe

 

Tandem Halfpipe
Halfpipe HP 24

For this type of vehicle: Individual vehicle construction possible
Robust earth-moving tipper with halfpipe body and front tipping ram, 40 km/h version
The big brother of the legendary halfpipe HP 20. Benefit from our long-standing experience in the production of indestructible halfpipes!

Chassis: Torsion-resistant chassis made of large-volume rectangular tube 300 x 150 mm/ suspended, height-adjustable drawbar for low hitch position with flanged 80 mm ball head coupling/ hydraulic support foot with double-acting ram, 6/2 way-valve to combine support foot hydraulic <> rear tailgate/ continuous tipping shaft at rear, heavy 80 mm diameter rocking ball bearings/ hole pattern G 140 for rear trailer coupling/ reinforced pendle axle unit with asymmetrically offset axles, very easy to pull, optimum ground adjustment due to the very large axle oscillation, good stability on rough terrain during driving but also during tipping, user-friendly central lubrication bar/ wheelbase 1.81 m for 10 t single axle load/ ALB-valve for automatic braking force control/ version with rigid (unsteered) BPW axles with automatic slack adjusters (ASA)

Body: Stylish halfpipe body, sheet thickness 6 mm, material quality S355/ front protection hood/ front tipping ram for for easy tipping and optimisation of the stability during tipping/ body end at top designed as pointed roof, soil or stones does not remain on it/ hydraulic opening rear tailgate, additional pendulum mounted at top to avoid damages through big stones, cutting edge all around for light and reliable closing of tailgate/ robust rubber supports between body and chassis/ bolted mudguards adjustable in width with a steep angle of attack and therefore self-cleaning/ rear lights mounted on the body at top in the range of the edge mudguards and thus mounted in a particular protected way

Other: 40 km/h homologation according to type approval EU (VO) 167/ 2013/ operating instructions/ robust lamp housing with pointed roof at vehicle rear, high-quality rear lights with shock-resistant lens, LED lighting system, white front position lamps, yellow side marker lamps, rear position lights/ exchangeable, modularly designed rear underride guard/ shot peened frame/ painting 2-component paint in Krampe-red (similar to RAL 3002) satin-finish

Individualbau

This trailer (Halfpipe HP 24) is customised and can be adapted to your requirements.

 
Gesamtgewicht

24.000 kg / 40 km/h
GVWR to Ger. Law

Transportvolumen

13,0 m³
Transport volume

Zugkraftbedarf

125 kW (170PS)
draft requirement

 
 
 

Technical data: Halfpipe HP 24

*1 Eigengewicht und die Nutzlast hängen von der jeweiligen Ausrüstung ab.
*2 In Deutschland sind Stützlasten von 3 bzw. 4 t nur bis 40 km/h erlaubt. Bei Schnellläufern ab 40 km/h gelten teils niedrigere Stützlasten. Es darf die zulässige Stützlast des Zugfahrzeuges nicht überschritten werden.
*3 Einzelachslast 10 t nur bei Achsabstand 1,81 m zulässig. Beratung erforderlich.
*6 Die technische Nutzlast ist von Fahrwerk und Bereifung abhängig.

Dimensions: Halfpipe HP 24




Ausrüstung wird geladen




Zubehör wird geladen

 

Professional advice?
Our sales team will be happy to help and answer all your questions about the Halfpipe HP 24.


Krampe sales team
 
Krampe
Fahrzeugbau GmbH
Contact

Krampe Fahrzeugbau GmbH
Zusestraße 4
D-48653 Coesfeld-Flamschen

Tel: +49 (0)25 41/80 178-0
Fax: +49 (0)25 41/80 178-14
Mail: info@krampe.de


Select language: deutsch english francais





Krampe Fahrzeugbau GmbH

Zusestraße 4 · D-48653 Coesfeld-Flamschen · Tel: +49 (0)25 41/80 178-0 · Fax: +49 (0)25 41/80 178-14 · Mail:info@krampe.de

gedruckt 28-03-2024 17:08:57 Uhr

Top